Home
Editorial
Series 4 Register
DL 200 Register
BLA Membership
IGM & DGM Info
Frame Numbers Pt 1
Frame Numbers Pt 2
Frame Numbers Pt 3
Frame Numbers Pt 4
Italian Frame Info
Spanish Frame Info
Spanish Paint Info
Indian Frame Info
Italian Paint Codes
Info Corner Series 1
Info Corner Series 2
Info Corner Series 3
Info Corner J & Luna
A-Z Pub Challenge
The Mantis
Lambretta in print
Lambretta in Taiwan
Lambretta Clubs
Contact
Site Map

 INDIAN FRAME NUMBER INFORMATION

1970's Sales Leaflet for the Vijai Deluxe

AUTO PRODUCTS INDIA

Lambretta production started in India in the 1950's with Auto Products India (API) who had a licensing agreement with Innocenti. API's production began with Model D and LD scooters. Initially scooters were built from parts shipped in from Italy and assembled in India. However, as time went on the Indians moved into building the Series 1 Li 150 (4 pole) and then the Series 2 Li 150 (6 pole) and they began to manufacture their own parts and machines.

In 1973 after losing the right to use the Lambretta name, all Series 2 Li 150's built by API became Lamby 150's. Production of the Series 2 machine carried on until approximately 1992 when the last batches of machines were dispatched from the API factory. The Lamby 150 retained the 6 pole set up.

Interestingly, in the 1970's API produced their version of the Series 2 TV 175 and this was called the MAC 175S. These machines are very similar in looks, though the MAC has rounded side panels with no indents and no panel hanles. It also came equipped with a 120kph speedo.

Interesting Points to note:

All API machines came with single seats fitted.

The Series 2 Li 150's had speedos made under licence by Yenkay, Pricol and Rainbow. They display the API logo and are 100kph items.

Lamby Polo - produced as a design collaboration between API and the Japanese, the Polo was advertised as the Space Shuttle on two wheels. It had redesigned legshields, headset, sidepanels, horncast and other items and its engine came with 12 volt electrics.

Along with the Lamby 150, the last Lamby Polos were built and despatched in 1992

SCOOTERS INDIA LIMITED

Set up by the Indian Government in 1972, SIL undertook production of the GP range of machines during the 1970's, 80's and 90's. In the main thse machines are predominantly 150cc, with some 200's and very few 125 machines. In 1982 SIL produced their version of the 100cc CENTO though not many were built and production of them ceased in the same year.

The GP 150 had numerous names in India including; Vijai Super, Vijai Vulcan, Vijai Deluxe, Vijai Super (Mk 2), Vijai Super Grand Prix 150 and the Allwyn Pushpak. There are some differences between the Mk1 and Mk 2 machines.

Mark 1:

Fixed front mudguard and 6 volt electrical system.

Mark 2:

Turning front mudguard, indicators fitted (initially on stalks that were mounted under the headset, this changed on later models to indicators mounted on the legshields. They were also mounted on the sidepanels). The Mark 2 had a 12 volt set up.

GP 200

Not really built for the Indian market as these were destined for export to Europe and the United States. Though some did end up in India. Essentially the scooter was the same as its Italian counterpart.

GP 125

Very few of these machines were built. They were often simply modified GP 150's or were built partially from parts from the Innocenti factory.

SIL GP 125, 150 & 200's: When these machines were first produced the frame stampings remained almost as they had when the Italians built them. HOWEVER, whereas the Italian machines will have a DGM number after the frame number the Indian machines will not.

GP 125: Early SIL made GP 125's are stamped 22/1* and have frame numbers that started at 009. It is also important to note that later built GP 125's had the frame numbers preceded by a 2 digit number that denotes the country it was built for (this practice was also used on the GP 150 & 200 models).

GP 150: Early GP 150's were stamped 22/0* which was followed by the frame number. Later machines had the frame prefix, then a star then a 2 digit County identifier another star and then the frame number.

GP 200: Currently we have no information on what numbering sequence the GP 200's started at but they were stamped 22/2.

Country Identifiers

Later produced SIL frames were stamped (for example)as follows:

22/0*00*000000

The 2 digit number after the frame number denotes the country that the scooter was built for. The countries being as follows:

00 - not used

01 - USA

02 - UK

03 - Columbia

04 - Singapore

05 - Italy

06 - Hong Kong

07 - West Germany

08 - Algeria

09 - Thailand

10 - Iran

11 - Japan

12 - Pakistan

13 - Greece

14 - Malaysia

15 - Indonesia

16 - Mauritius

17 - Switzerland

18 - Sri Lanka

19 - Nepal

20 - New Zealand

21 - Egypt

22 - Lucknow

23 - Bihar

24 - West Bengal

25 - Kerala

26 - Syria

27 - Australia

28 - South Yemen

29 - Bangladesh

30 - Tawi Scooters Ltd

31 - Spain

32 - Sweden

33 - Belgium